HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Headlamp Dimmer Switch: Service and Repair
Installation
LIGHTING (EXT): HEADLIGHT DIMMER SWITCH: INSTALLATION
1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY
(a) Using pliers, expand the clamp as shown in the illustration.
(b) While holding the clamp expanded, install the headlight dimmer switch assembly as shown in the illustration.
(c) Engage the claw.
(d) Release the clamp to install the headlight dimmer switch assembly.
(e) Connect the connector.
2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY See: Sensors and Switches/Sensors and Switches - Wiper and Washer Systems/Wiper
Switch/Service and Repair/Installation
3. INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY
(a) Install the spiral cable with sensor sub-assembly See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and
Repair/Installation.