HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Turn Signal Flasher: Component Tests and General Diagnostics
LIGHTING (EXT): TURN SIGNAL FLASHER ASSEMBLY: INSPECTION
1. INSPECT TURN SIGNAL FLASHER ASSEMBLY
(a) Disconnect the F15 turn signal flasher assembly connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
(c) If the result is not as specified, repair or replace the wire harness or connector.
(d) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(e) If the result is not as specified, repair or replace the wire harness or connector.
(f) Reconnect the F15 turn signal flasher assembly connector.
(g) Measure the voltage according to the valve(s) in the table below.