HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Crankshaft Position Sensor: Service and Repair
Installation
2AZ-FXE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR: INSTALLATION
1. INSTALL CRANKSHAFT POSITION SENSOR
(a) Apply a light coat of engine oil to the O-ring on the crankshaft position sensor.
(b) Install the crankshaft position sensor with the bolt.
Text in Illustration
Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)
(c) Connect the crankshaft position sensor connector.
2. INSTALL V-RIBBED BELT TENSIONER ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Unit/Installation
3. INSTALL V-RIBBED BELT
(a) Install the V-ribbed belt See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair/Installation.
4. INSTALL ELECTRIC INVERTER COMPRESSOR
(a) Install the electric inverter compressor See: Heating and Air Conditioning/Compressor HVAC/Service and Repair/Installation.