HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
HINT
*
DTC communication uses the CAN communication system.
*
*1: Refer to Engine Control system See: Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/U
Code Charts/U0001.
*
*2: Refer to Engine Control system See: Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/U
Code Charts/U0293.
(b) Hybrid Vehicle Control ECU / Techstream Display "Hybrid Control"
HINT
Refer to Hybrid Control System "DTC CHECK / CLEAR" See: Hybrid Drive Systems/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes/Hybrid Control System.
HINT
*
DTC communication uses the CAN communication system.
*
*3: Refer to Engine Control system See: Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/U
Code Charts/U0110.
*
*4: Refer to Engine Control system See: Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/U
Code Charts/U0110.
*
*5: Refer to Engine Control system See: Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/U
Code Charts/U0151.
*
*6: Refer to Engine Control system See: Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/U
Code Charts/U0164.
*
*7: Refer to Engine Control system See: Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/U
Code Charts/U0424.
(c) Power Management Control ECU / Techstream Display "Electric Power Control"