HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN J/C RH - TRANSMISSION CONTROL
ECU)
OK -- Continue to next step.
21. CHECK FOR SHORT IN CAN BUS WIRES (CAN J/C RH - AFS ECU)
(a) Disconnect the headlight swivel ECU (AFS ECU) connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN J/C RH - AFS ECU)
OK -- Continue to next step.
22. CHECK FOR SHORT IN CAN BUS WIRES (CAN J/C RH)
(a) Reconnect the instrument panel wire and engine room main wire to the CAN junction connector RH.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NOTICE:
*
The resistance must be measured after the main wire connected ECUs (hybrid vehicle control ECU and combination meter), CAN