HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
_hybrid/Page-1229034.png)
A -- Continue to next step.
2. CHECK FOR SHORT TO +B IN CAN BUS WIRE (CAN NO. 1 J/C)
(a) Disconnect the wire harness connector from the CAN No. 1 junction connector lower side.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Result:
C -- CHECK FOR SHORT TO +B IN CAN BUS WIRE (ECU, SENSOR)
