HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Standard Resistance:
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (HEADLIGHT SWIVEL ECU)
OK -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (POWER SOURCE CIRCUIT)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (POWER SOURCE CIRCUIT)
OK -- REPLACE HEADLIGHT SWIVEL ECU (AFS ECU) See: Lighting and Horns/Headlamp/Headlamp Control Module
Transmission Control ECU Communication Stop Mode
NETWORKING: CAN COMMUNICATION SYSTEM: Transmission Control ECU Communication Stop Mode
- Transmission Control ECU Communication Stop Mode
DESCRIPTION
The transmission control ECU drives the parking lock actuator in accordance with signals from the power management control ECU.
WIRING DIAGRAM