HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
HINT
*
DTC communication uses the CAN communication system.
*
*8: Shift state signal can not received from hybrid vehicle control ECU
(u) Multiplex tilt and Telescopic ECU / Techstream Display "Tilt and Telescopic"
HINT
*
DTC communication uses the CAN communication system.
*
*10: If B2621 is output alone (U1115 is not output), CAN communication is normal. Refer to Power Tilt and Telescopic Steering
Column System See: Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/B Code Charts/B2621.
*
*11: If B2624 is output alone (U1115 is not output), CAN communication is normal. Refer to Power Tilt and Telescopic Steering
Column System See: Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/B Code Charts/B2624.
(v) Outer Mirror Control ECU LH/ Techstream Display "L-Mirror"
HINT
DTC communication uses the CAN communication system.
(w) Outer Mirror Control ECU RH/ Techstream Display "R-Mirror"
HINT
DTC communication uses the CAN communication system.
5. DTC COMBINATION TABLE
(a) CAN No. 1 Bus