HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / AFS, Power Source Control, Smart Access or Main Body / Trouble Codes.
(e) Check the details of the DTC(s) See: Testing and Inspection/Diagnostic Trouble Code Descriptions/LIN Communication System.
2. CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / AFS, Power Source Control, Smart Access or Main Body / Trouble Codes.
(e) Clear the DTC(s).
LIN Communication System
NETWORKING: LIN COMMUNICATION SYSTEM: PROBLEM SYMPTOMS TABLE
HINT
*
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of
the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the
suspected areas in the order they are listed. Replace parts as necessary.
*
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
LIN Communication System
Problem Symptoms Table
NETWORKING: CAN COMMUNICATION SYSTEM: PROBLEM SYMPTOMS TABLE
HINT
*
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of
the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the
suspected areas in the order they are listed. Replace parts as necessary.
*
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Result of CAN No. 1 Bus Check