HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
_hybrid/Page-1230045.png)
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Result:
C -- REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (CAN J/C RH - COMBINATION METER)
B -- REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (CAN NO. 1 J/C - CAN J/C RH)
A -- Continue to next step.
20. CHECK FOR SHORT IN CAN BUS WIRES (CAN J/C RH - TRANSMISSION CONTROL ECU)
(a) Disconnect the transmission control ECU connector.
(b) Disconnect the engine room main wire from the CAN junction connector RH.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
