HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Result:
B -- CHECK FOR SHORT TO GND IN CAN BUS WIRE (ECU, SENSOR)
A -- REPLACE CAN JUNCTION CONNECTOR LH
5. CHECK SHORT TO GND IN CAN BUS WIRE (CAN J/C RH)
(a) Disconnect the instrument panel wire from the CAN junction connector RH.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Result:
C -- CHECK FOR SHORT TO GND IN CAN BUS WIRE (ECU, SENSOR)