HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
_hybrid/Page-1245001.png)
Manifold Pressure/Vacuum Sensor: Service and Repair
Removal
2AZ-FXE EMISSION CONTROL: VACUUM SENSOR: REMOVAL
1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
2. REMOVE VACUUM SENSOR ASSEMBLY
(a) Disconnect the connector, wire harness clamp and vacuum hose.
(b) Remove the bolt and vacuum sensor assembly.
