HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Canister Purge Control Valve: Service and Repair
Removal
2AZ-FXE EMISSION CONTROL: PURGE VALVE: REMOVAL
1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(a) Remove the windshield wiper motor and link assembly See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Removal.
2. REMOVE WATER GUARD PLATE RH See: Brakes and Traction Control/Power Brake Assist/Vacuum Brake Booster/Service and
Repair/Removal
3. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL See: Brakes and Traction Control/Power Brake Assist/Vacuum Brake
Booster/Service and Repair/Removal
4. REMOVE COWL BODY MOUNTING REINFORCEMENT RH See: Brakes and Traction Control/Power Brake Assist/Vacuum Brake
Booster/Service and Repair/Removal
5. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY See: Brakes and Traction Control/Power Brake Assist/Vacuum Brake
Booster/Service and Repair/Removal
6. REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY
(a) Disconnect the connector and wire harness clamp.
(b) Disconnect the 2 fuel vapor feed hoses.
(c) Remove the No. 1 vacuum switching valve assembly from the air cleaner hose.