HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Accelerator Pedal Position Sensor: Service and Repair
Installation
HYBRID / BATTERY CONTROL: ACCELERATOR PEDAL SENSOR: INSTALLATION
1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY
NOTICE:
*
Avoid physical shock to the accelerator pedal sensor assembly.
*
Do not disassemble the accelerator pedal sensor assembly.
(a) Install the accelerator pedal sensor assembly with the 2 bolts.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
(b) Connect the accelerator pedal sensor assembly connector.