HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
_hybrid/Page-1441001.png)
Knock Sensor: Service and Repair
Installation
2AZ-FXE ENGINE CONTROL: KNOCK SENSOR: INSTALLATION
1. INSTALL KNOCK SENSOR
(a) Install the knock sensor with the nut.
Text in Illustration
Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)
NOTICE:
Make sure that the knock sensor is in the correct position.
(b) Connect the knock sensor connector.
2. INSTALL INTAKE MANIFOLD
(a) Install the intake manifold See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Installation.
