HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Camshaft Position Sensor: Service and Repair
Removal
2AZ-FXE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: REMOVAL
1. REMOVE FRONT WIPER MOTOR AND LINK
(a) Remove the front wiper and link See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Removal.
2. REMOVE WATER GUARD PLATE RH See: Brakes and Traction Control/Power Brake Assist/Vacuum Brake Booster/Service and
Repair/Removal
3. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL See: Brakes and Traction Control/Power Brake Assist/Vacuum Brake
Booster/Service and Repair/Removal
4. REMOVE COWL BODY MOUNTING REINFORCEMENT RH See: Brakes and Traction Control/Power Brake Assist/Vacuum Brake
Booster/Service and Repair/Removal
5. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY See: Brakes and Traction Control/Power Brake Assist/Vacuum Brake
Booster/Service and Repair/Removal
6. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY See: Fuel Delivery and Air Induction/Throttle Body/Service and Repair/Removal
8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
9. REMOVE CAMSHAFT POSITION SENSOR
(a) Disconnect the camshaft position sensor connector.
(b) Remove the bolt and camshaft position sensor.