HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Ignition Switch: Service and Repair
Removal
2AZ-FXE STARTING: POWER SWITCH: REMOVAL
1. PRECAUTION (w/ Navigation System)
NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
(a) Remove the luggage compartment floor mat.
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL See: Starting and Charging/Battery/Service and Repair/Removal
4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Removal
5. REMOVE POWER SWITCH
(a) Detach the 2 claws and remove the power switch.