HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL See: Starting and Charging/Battery/Service and Repair/Removal
4. REMOVE REAR SEAT CUSHION ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Removal
5. REMOVE REAR SEAT CUSHION LOCK HOOK See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Removal
6. REMOVE REAR SEAT HEADREST ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Removal
7. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear
Seat Assembly/Removal
8. REMOVE REAR SEAT HEADREST ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Removal
9. REMOVE REAR SEATBACK ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Removal
10. REMOVE REAR DOOR SCUFF PLATE
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal.
11. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY
HINT
Use the same procedure for the RH side and LH side See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal
and Replacement/Rear Seat Side Airbag Assembly/Removal.
12. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal.
13. REMOVE DOOR CONTROL RECEIVER
(a) Disconnect the connector.
(b) Remove the bolt and door control receiver.
Installation
DOOR LOCK: DOOR CONTROL RECEIVER (for Rear Side): INSTALLATION
1. INSTALL DOOR CONTROL RECEIVER
(a) Install the door control receiver with the bolt.
Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)
(b) Connect the connector.
2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY