lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Relays and Modules - HVAC > < Components|Page 420
Page 1
background image

Cruise Control Module: Service and Repair
Installation

CRUISE CONTROL: DRIVING SUPPORT ECU: INSTALLATION

1. INSTALL DRIVING SUPPORT ECU

(a) Engage the claw to install the driving support ECU as shown in the illustration.

NOTICE:
Do not install the driving support ECU if it has been damaged or impacted in any way.

2. INSTALL ECU INTEGRATION BOX RH   See: Relays and Modules - Power and Ground Distribution/Power Distribution Module/Service and

Repair/Installation

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY   See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument

Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Installation

4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY   See: Restraint Systems/Air Bag Systems/Air Bag/Service and

Repair/Removal and Replacement/Knee Airbag Assembly (for Front Passenger Side)/Installation

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY   See: Body and Frame/Interior Moulding / Trim/Dashboard /

Instrument Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Installation

6. INSTALL INSTRUMENT SIDE PANEL RH   See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and

Repair/Removal and Replacement/Upper Instrument Panel/Installation

7. INSTALL COWL SIDE TRIM BOARD RH

HINT
Use the same procedure for the RH side and LH side  
  See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.

8. INSTALL FRONT DOOR OPENING TRIM COVER RH

HINT
Use the same procedure for the RH side and LH side  
  See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.

9. INSTALL FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and LH side  
  See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL   See: Starting and Charging/Battery/Service and Repair/Installation

11. INSTALL LUGGAGE COMPARTMENT FLOOR MAT   See: Starting and Charging/Battery/Service and Repair/Installation

12. PERFORM DIAGNOSTIC SYSTEM CHECK

(a) Perform Diagnostic System Check    See: Restraint Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble

Codes/DTC Check / Clear.

13. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS Warning Light    See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic

Overview/Diagnosis System.

Relays and Modules - HVAC > < Components|Page 420