HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Body Control Module: Service and Repair
Installation
POWER DISTRIBUTION: MAIN BODY ECU: INSTALLATION
1. INSTALL MAIN BODY ECU
NOTICE:
*
Make sure that no foreign objects get on the connecting surfaces.
*
Do not touch the ECU connector.
(a) Insert the main body ECU up to the position it contacts the housing sidewall of the guide as shown in the illustration.
Text in Illustration
HINT
Make sure to keep the angle 20° or more as shown in the illustration.
(b) Slide the guide of the main body ECU along the housing sidewall so that it contacts the junction block fuses as shown in the illustration.
Text in Illustration
(c) While contacting the main body ECU to side A of the junction block (point of rotation), rotate it downward as shown in the illustration.
Text in Illustration
(d) Press the push area until the claw engages to install the main body ECU.