lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Procedures|Page 6563 > < Procedures|Page 6561
Page 4
background image

185 mm (7.28 in.)

Inner diameter:

360 mm (1.18 ft.)

Text in Illustration

CAUTION:
*

Make sure that the wires are tight. If there is slack in the wires, the driver side knee airbag assembly may break loose when the
airbag is deployed.

*

Always tie down the driver side knee airbag assembly with the airbag deployment side facing inside the tire as shown in the
illustration.

NOTICE:
The tires may be marked by the airbag deployment, so use an unneeded tire.

(d) Install SST.

(1) After connecting the following SST to each other, connect them to the driver side knee airbag assembly.

SST : 09082-00802

09082-10801

09082-20801

(e) Place the tires.

(1) Place at least 2 tires under the tire to which the driver side knee airbag assembly is tied.

Text in Illustration

(2) Place at least 2 tires onto the tire to which the driver side knee airbag assembly is tied. The top tire should have a wheel installed.

NOTICE:
Do not place the SST connector under the tire because it could be damaged.

(3) Tie the tires together with the 2 wires.

Procedures|Page 6563 > < Procedures|Page 6561