HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
CAUTION:
When storing the front passenger airbag assembly, keep the airbag deployment side facing upward.
(a) Remove the 2 clamps to separate the instrument wire.
(b) Remove the 2 screws.
(c) Lean the instrument panel and disengage the 3 hooks and 2 pins.
Text in Illustration
(d) Disengage the 3 hooks to remove the front passenger airbag assembly from the upper instrument panel assembly.
6. REMOVE NO. 3 INSTRUMENT PANEL WIRE
(a) Disengage the clamp.
(b) Using a screwdriver with the tip wrapped with protective tape, release the 2 airbag connector locks.
Text in Illustration
(c) Disconnect the 2 airbag connectors to remove the No. 3 instrument panel wire from the front passenger airbag assembly.
NOTICE:
When disconnecting any airbag connector, take care not to damage the airbag wire harness.
Installation