HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Air Bag: Testing and Inspection
Curtain Shield Airbag Assembly
SUPPLEMENTAL RESTRAINT SYSTEMS: CURTAIN SHIELD AIRBAG ASSEMBLY: ON-VEHICLE INSPECTION
CAUTION:
Be sure to follow the correct removal and installation procedures of the curtain shield airbag assemblies.
1. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check / Clear.
(b) Visually check for defects with the curtain shield airbag assemblies installed on the vehicle.
(1) The defects are as follows:
*
Cuts on each pillar garnish or the roof headlining assembly around the curtain shield airbag assemblies
*
Small cracks on each pillar garnish or the roof headlining assembly around the curtain shield airbag assemblies
*
Significant discoloration on each pillar garnish or the roof headlining assembly around the curtain shield airbag assemblies
OK:
No defects are found.
HINT
If any of the defects is found, replace each pillar garnish or the roof headlining assembly with a new one.
2. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
(a) Perform a diagnostic system check See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check / Clear.
(b) Visually check for defects with the curtain shield airbag assemblies installed on the vehicle.
(1) The defects are as follows:
*
Cuts on the curtain shield airbag assemblies
*
Small cracks on the curtain shield airbag assemblies
*
Significant discoloration on the curtain shield airbag assemblies
*
Cracks or other damage to the connector
OK:
No defects are found.
HINT
If any of the defects is found, replace the curtain shield airbag assembly with a new one.