lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Impact Sensor > < Components|Page 6656
Page 2
background image

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

(c) Rotate the spiral cable counterclockwise slowly by hand until it stops.

NOTICE:
Do not turn the spiral cable using the airbag wire harness.

(d) Rotate the spiral cable clockwise approximately 2.5 turns to align the marks.

Text in Illustration

NOTICE:
Do not turn the spiral cable using the airbag wire harness.

HINT
The spiral cable will rotate approximately 2.5 turns to both the left and right from the center.

9. INSTALL STEERING WHEEL ASSEMBLY

HINT
Refer to the procedure from Install Steering Wheel Assembly  
  See: Steering and Suspension/Steering/Steering Wheel/Service and
Repair/Installation.

Impact Sensor > < Components|Page 6656