HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
_hybrid/Page-2219003.png)
(1) Remove the front seat outer belt assembly and SST.
(2) Place the outer belt in a plastic bag, tie the end tightly, and dispose of it in the same way as other general parts.
CAUTION:
*
The outer belt becomes very hot when the front seat outer belt pretensioner is deployed, so leave it untouched for at least 30
minutes after it has been deployed.
*
Use gloves and safety glasses when handling an outer belt with a pretensioner that has been deployed.
*
Always wash your hands with water after completing the operation.
*
Do not apply water, etc. to a front seat outer belt assembly with a pretensioner that has been deployed.
HINT
When scrapping a vehicle, deploy the front seat outer belt pretensioners, and then scrap the vehicle with the deployed outer belt
installed.
2. DISPOSE OF FRONT SEAT OUTER BELT ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)
CAUTION:
*
Use gloves and safety glasses when handling a front seat outer belt with a deployed pretensioner.
*
Always wash your hands with water after completing the operation.
*
Do not apply water, etc. to a front seat outer belt with a deployed pretensioner.
*
When disposing of a pretensioner equipped front seat outer belt, never deploy the belt in the customer's vehicle.
NOTICE:
*
Never dispose of a front seat outer belt assembly with a pretensioner that has not been deployed.
*
The seat belt pretensioner produces an exploding sound when it deploys, so perform the operation outdoors where it will not
disturb local residents.
*
When deploying a front seat outer belt (with a seat belt pretensioner), perform the operation at least 10 m (33 ft.) away from the
front seat outer belt.
*
Be sure to follow the procedure listed below when deploying the seat belt pretensioner.
(a) Check the function of SST.
SST : 09082-00700
CAUTION:
When deploying the seat belt pretensioner, always use the specified SST.
(1) Connect the red clip of SST to the battery positive (+) terminal and the black clip to the battery negative (-) terminal.
Text in Illustration
HINT
At this time, do not connect the yellow connector. It will in a later step be connected to the seat belt pretensioner.
