HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
_hybrid/Page-2219008.png)
SST : 09082-00700
SST : 09082-00770
CAUTION:
When deploying the seat belt pretensioner, always use the specified SST.
(1) Connect the red clip of SST to the battery positive (+) terminal and the black clip to the battery negative (-) terminal.
Text in Illustration
HINT
At this time, do not connect the yellow connector that will later be connected to the seat belt pretensioner.
(2) Press the SST deployment switch, and check that the LED of the SST deployment switch lights up.
CAUTION:
If the LED is lit when the deployment switch is not pressed, SST may be malfunctioning. Therefore, do not use SST.
(b) Connect SST.
(1) Connect 2 SST, and then connect them to the rear seat outer belt pretensioner.
SST : 09082-00700
SST : 09082-00770
NOTICE:
