HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
1. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
(a) Engage the guide to temporarily install the front shoulder belt anchor adjuster assembly with the 2 bolts.
(b) Fully tighten the bolt (A) first, then the bolt (B) to install the front shoulder belt anchor adjuster assembly.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
2. INSTALL FRONT SEAT OUTER BELT ASSEMBLY
(a) Temporarily install the front seat outer belt assembly with the 2 bolts.
(b) Fully tighten the bolt (A) first, then the bolt (B) to install the front seat outer belt assembly.
Bolt A - Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)
Bolt B - Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
(c) Connect the pretensioner connector and lock the locking button as shown in the illustration.
Text in Illustration
NOTICE:
Securely lock the locking button.
(d) Connect the 2 connectors.
(e) Connect the shoulder anchor of the front seat outer belt assembly with the nut.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
3. INSTALL CENTER PILLAR GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
4. INSTALL LOWER CENTER PILLAR GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
5. CONNECT FRONT SEAT OUTER BELT ASSEMBLY
(a) Install the floor end of the front seat outer belt assembly with the bolt.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
(b) Check if the ELR locks.