HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Parking Assist Switch: Testing and Inspection
PARK ASSIST / MONITORING: WIDE VIEW FRONT MONITOR SWITCH: INSPECTION
1. INSPECT NO. 1 PATTERN SELECT SWITCH ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Resistance:
Test in Illustration
(b) Check the illumination
(1) Connect a positive (+) lead to terminal 3(ILL+) and a negative (-) lead to terminal 6(ILL-) of the No. 1 pattern select switch assembly
connector.
(2) Check that the switch illumination comes on.
OK:
No. 1 pattern select switch illumination comes on.
Test in Illustration