HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Temperature Switch (Warning Indicator): Service and Repair
Installation
2AZ-FXE COOLING: TEMPERATURE SWITCH: INSTALLATION
1. INSTALL TEMPERATURE SWITCH
(a) Using a 19 mm deep socket wrench, install a new temperature switch.
Torque : 7.4 Nm (75 kgf-cm, 65 in-lbf)
NOTICE:
Do not apply any excessive force to the heater pipe when installing the temperature switch.
(b) Connect the temperature switch connector.
2. ADD ENGINE COOLANT (for Engine) See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair/Coolant (for Engine)
3. INSPECT FOR COOLANT LEAK (for Engine) See: Engine, Cooling and Exhaust/Cooling System/Testing and Inspection/Component Tests and
General Diagnostics/Cooling System
4. INSTALL NO. 1 ENGINE UNDER COVER
5. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation