HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Fuel Gauge Sender: Testing and Inspection
2AZ-FXE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSPECTION
1. INSPECT FUEL SENDER GAUGE ASSEMBLY
Text in Illustration
(a) Remove the fuel sender gauge assembly.
(b) Check that the float moves smoothly between F and E.
(c) Measure the resistance between terminals 1 and 2 of the connector according to the value(s) in the table below.
Standard Resistance:
*
If the value is not as specified, replace the fuel sender gauge assembly.