HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
_hybrid/Page-578001.png)
Crankshaft Position Sensor: Testing and Inspection
2AZ-FXE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR: INSPECTION
1. INSPECT CRANKSHAFT POSITION SENSOR
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NOTICE:
"Cold" and "Hot" mean the temperature of the coils themselves. "Cold" is from -10 to 50°C (14 to 122°F) and "Hot" is from 50 to
100°C (122 to 212°F).
(b) If the resistance is not as specified, replace the sensor.
