HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
_hybrid/Page-592001.png)
Knock Sensor: Service and Repair
Removal
2AZ-FXE ENGINE CONTROL: KNOCK SENSOR: REMOVAL
1. REMOVE INTAKE MANIFOLD
(a) Remove the intake manifold See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal.
2. REMOVE KNOCK SENSOR
(a) Disconnect the knock sensor connector.
(b) Remove the nut and knock sensor.
