HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Seat Occupant Sensor: Service and Repair
Removal
SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION ECU: REMOVAL
1. PRECAUTION
CAUTION:
Be sure to read Precaution thoroughly before servicing See: Restraint Systems/Air Bag Systems/Service Precautions.
NOTICE:
*
When removing front seat assembly RH, perform zero point calibration and sensitivity check See: Restraint Systems/Testing and
Inspection/Programming and Relearning.
*
When replacing the occupant classification ECU, perform zero point calibration and sensitivity check See: Restraint
Systems/Testing and Inspection/Programming and Relearning.
2. REMOVE FRONT SEAT ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Removal.
3. REMOVE OCCUPANT CLASSIFICATION ECU
(a) Disconnect the 2 connectors.
(b) Disengage the claw and remove the occupant classification ECU.