HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Text in Illustration
(b) Inspect the camber, caster and steering axis inclination.
Camber (Unloaded Vehicle):
Caster (Unloaded Vehicle):
Steering Axis (Unloaded Vehicle):
4. ADJUST CAMBER
NOTICE:
Inspect toe-in after the camber has been adjusted.
(a) Remove the front wheel.
(b) Loosen the 2 nuts.
NOTICE:
Keep the bolts inserted.
(c) Clean the installation surfaces of the front shock absorber and the steering knuckle.
(d) Temporarily install the 2 nuts. (Step A)
(e) Fully push or pull the front axle hub in the direction of the required adjustment. (Step B)
(f) Tighten the nuts.