HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Steering Column Control Module: Service and Repair
Removal
STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU: REMOVAL
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system
before servicing See: Restraint Systems/Air Bag Systems/Service Precautions.
1. REMOVE STEERING PAD
HINT
Refer to the instructions for Removal of the steering pad See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Removal and Replacement/Steering Pad/Removal.
2. REMOVE STEERING WHEEL ASSEMBLY See: Steering/Steering Wheel/Service and Repair/Removal
3. REMOVE LOWER NO. 2 STEERING COLUMN COVER See: Steering/Steering Column/Service and Repair/Steering Column Assembly (for
Power Tilt and Power Telescopic Steering Column)/Removal
4. REMOVE LOWER STEERING COLUMN COVER See: Steering/Steering Column/Service and Repair/Steering Column Assembly (for Power
Tilt and Power Telescopic Steering Column)/Removal
5. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY
HINT
Refer to the instructions for Removal of the driver side knee airbag assembly See: Restraint Systems/Air Bag Systems/Air
Bag/Service and Repair/Removal and Replacement/Knee Airbag Assembly (for Driver Side)/Removal.
6. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU
(a) Disconnect the 2 connectors from the multiplex tilt and telescopic ECU.
(b) Disengage the wire harness clamp from the multiplex tilt and telescopic ECU.
(c) Remove the nut and the multiplex tilt and telescopic ECU from the steering column assembly.