HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Tilt Wheel Switch: Service and Repair
Removal
STEERING COLUMN: TILT AND TELESCOPIC MANUAL SWITCH: REMOVAL
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system
before servicing See: Restraint Systems/Air Bag Systems/Service Precautions.
1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
2. REMOVE STEERING PAD
HINT
Refer to the instructions for Removal of the steering pad See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Removal and Replacement/Steering Pad/Removal.
3. REMOVE STEERING WHEEL ASSEMBLY See: Steering/Steering Wheel/Service and Repair/Removal
4. REMOVE LOWER NO. 2 STEERING COLUMN COVER See: Steering/Steering Column/Service and Repair/Steering Column Assembly (for
Power Tilt and Power Telescopic Steering Column)/Removal
5. REMOVE LOWER STEERING COLUMN COVER See: Steering/Steering Column/Service and Repair/Steering Column Assembly (for Power
Tilt and Power Telescopic Steering Column)/Removal
6. REMOVE TILT AND TELESCOPIC SWITCH
(a) Disconnect the connector.
(b) Disengage the claw and pull out the tilt and telescopic switch.
NOTICE:
Pushing on the claw too hard will break the claw.