HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Steering Control Module: Service and Repair
Removal
POWER ASSIST SYSTEMS: POWER STEERING ECU: REMOVAL
1. REMOVE UPPER INSTRUMENT PANEL ASSEMBLY
HINT
Refer to the instructions for Removal of the upper instrument panel assembly See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Removal.
2. REMOVE METER MIRROR SUB-ASSEMBLY (w/ head-up Display) See: Instrument Panel, Gauges and Warning Indicators/Instrument
Cluster / Carrier/Service and Repair/Removal and Replacement/Head-Up Display/Removal
3. REMOVE POWER STEERING ECU ASSEMBLY
(a) Disengage the wire harness clamp from the power steering ECU assembly.
Text in Illustration
(b) Disconnect the connector from the power steering ECU assembly.
HINT
As shown in the illustration, pull out the lock of the lock lever and turn the lock lever to disconnect the connector.
(c) Disconnect the 3 connectors from the power steering ECU assembly.
(d) Remove the bolt, 2 nuts and power steering ECU assembly.