HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(b) Using a transmission jack, support the front suspension crossmember sub-assembly.
(c) Remove the 2 bolts and front suspension crossmember sub-assembly.
24. REMOVE FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH
(a) Remove the 2 bolts, nut and front No. 1 lower suspension arm sub-assembly LH from the front suspension crossmember.
NOTICE:
Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.
25. REMOVE FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY RH
HINT
Perform the same procedure as for the LH side.
26. REMOVE FRONT SUSPENSION MEMBER FRONT BRACE LH See: Stabilizer Bar/Service and Repair/Front Stabilizer Bar/Removal
27. REMOVE FRONT SUSPENSION MEMBER FRONT BRACE RH
HINT
Perform the same procedure as for the LH side.
28. REMOVE FRONT STABILIZER BAR
(a) Remove the front stabilizer bar with front stabilizer bar bushings from the front suspension crossmember sub-assembly.