HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Removal
FRONT SUSPENSION: FRONT SHOCK ABSORBER: REMOVAL
HINT
*
Use the same procedure for the RH and LH sides.
*
The procedure listed below is for the LH side.
1. REMOVE FRONT WHEEL
2. REMOVE FRONT WIPER MOTOR AND LINK ASSEMBLY
(a) Remove the front wiper motor and link assembly See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Removal.
3. REMOVE WATER GUARD PLATE RH See: Brakes and Traction Control/Power Brake Assist/Vacuum Brake Booster/Service and
Repair/Removal
4. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL See: Brakes and Traction Control/Power Brake Assist/Vacuum Brake
Booster/Service and Repair/Removal
5. REMOVE COWL BODY MOUNTING REINFORCEMENT RH See: Brakes and Traction Control/Power Brake Assist/Vacuum Brake
Booster/Service and Repair/Removal
6. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY See: Brakes and Traction Control/Power Brake Assist/Vacuum Brake
Booster/Service and Repair/Removal
7. REMOVE FRONT SUSPENSION SUPPORT DUST COVER
(a) Remove the front suspension support dust cover.
8. SEPARATE FRONT STABILIZER LINK ASSEMBLY