HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Removal
TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER: REMOVAL
1. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY LH
HINT
Refer to the instructions for Removal of the rear seat side airbag assembly LH See: Restraint Systems/Air Bag Systems/Air
Bag/Service and Repair/Removal and Replacement/Rear Seat Side Airbag Assembly/Removal.
2. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal
3. REMOVE TIRE PRESSURE WARNING RECEIVER
(a) Remove the bolt.
(b) Disengage the 2 tabs from the holes to remove the tire pressure warning receiver.
(c) Disconnect the connector from the tire pressure warning receiver.