lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Transmission Position Switch/Sensor, CVT > < Components|Page 4419
Page 2
background image

HINT
Use the same procedure as for the LH side  
  See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
and Replacement/Installation.

18. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY   See: Accessories and Optional Equipment/Radio,

Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Radio Receiver/Installation

19. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY   See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument

Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Installation

20. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY (w/o Navigation System)   See: Body and Frame/Interior

Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Installation

21. INSTALL REMOTE TOUCH ASSEMBLY (w/ Navigation System)   See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument

Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Installation

22. INSTALL INSTRUMENT PANEL FINISH PANEL END RH   See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument

Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Installation

23. INSTALL INSTRUMENT PANEL FINISH PANEL END LH   See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument

Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Installation

24. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL   See: Starting and Charging/Battery/Service and Repair/Installation

25. INSTALL LUGGAGE COMPARTMENT FLOOR MAT   See: Starting and Charging/Battery/Service and Repair/Installation

26. INSPECT SHIFT LEVER

(a) Turn the power switch on (READY).

(b) Check that all available shift positions can be selected moving the shift lever.

HINT
After the shift lever is replaced with a new one, perform the above operation. If this operation is not performed, moving the shift lever
may not initially select shift positions.

27. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light    See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic

Overview/Diagnosis System.

Transmission Position Switch/Sensor, CVT > < Components|Page 4419