HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
SST : 09950-00020
NOTICE:
Do not drop the front drive inboard joint assembly RH.
Text in Illustration
(b) Remove the bearing bracket hole snap ring.
NOTICE:
Be careful not to drop the inboard joint assembly.
26. REMOVE FRONT DRIVE SHAFT BEARING (for RH Side)
(a) Using a snap ring expander, remove the snap ring.
(b) Using SST and a press, remove the front drive shaft bearing from the front drive inboard joint assembly RH.
SST : 09527-10011
NOTICE:
Do not drop the front drive inboard joint assembly RH.
Text in Illustration
(c) Remove the bearing case snap ring.
Reassembly
DRIVE SHAFT / PROPELLER SHAFT: FRONT DRIVE SHAFT ASSEMBLY: REASSEMBLY
1. INSTALL FRONT DRIVE SHAFT BEARING (for RH Side)
(a) Using SST and a press, install a new front drive shaft bearing to the drive shaft bearing case.