HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Do not damage the inboard joint boot.
(b) For claw engagement type:
(1) Set the front No. 2 axle inboard joint boot clamp LH to the inboard joint boot.
(2) Using needle-nose pliers, engage the 2 claws to install the front No. 2 axle inboard joint boot clamp LH as shown in the illustration.
NOTICE:
*
Do not damage the inboard joint boot.
*
Do not deform the claw.
21. INSTALL FRONT NO. 2 AXLE INBOARD JOINT BOOT CLAMP RH
HINT
Use the same procedure as for the LH side.
22. INSTALL FRONT AXLE INBOARD JOINT BOOT CLAMP LH
(a) For one touch type:
(1) Install the front axle inboard joint boot clamp LH onto the inboard joint boot.
(2) Using a screwdriver, install the front axle inboard joint boot clamp LH as shown in the illustration.
Text in Illustration
NOTICE:
Be careful not to damage the boot.
(b) For claw engagement type:
(1) Set the front axle inboard joint boot clamp LH to the inboard joint boot.
(2) Using needle-nose pliers, engage the 2 claws to install the front axle inboard joint boot clamp LH as shown in the illustration.
NOTICE:
*
Do not damage the inboard joint boot.
*
Do not deform the claw.
23. INSTALL FRONT AXLE INBOARD JOINT BOOT CLAMP RH
HINT
Use the same procedure as for the LH side.
24. INSPECT FRONT DRIVE SHAFT ASSEMBLY See: Testing and Inspection/Component Tests and General Diagnostics