HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
20. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY
(a) Disengage the 3 clips and raise the front portion of the package tray trim panel assembly.
(b) Pass the 3 rear seat belt floor anchors through the holes in the package tray trim panel assembly and remove the package tray trim panel
assembly.
21. REMOVE CENTER STOP LIGHT SET See: Lighting and Horns/Center Mounted Brake Lamp/Service and Repair/Removal
22. REMOVE NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY
(a) Disengage the 3 clips and 5 guides, and remove the No. 2 package tray trim panel assembly.
23. REMOVE REAR WINDOW SHADE ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 4 bolts (A).
(c) Loosen the bolt (B) and remove the rear window shade assembly.
NOTICE:
Bolt (B) cannot be removed from the rear window shade assembly.
24. REMOVE REAR SUNSHADE RELAY
NOTICE:
When disassembling the rear sunshade assembly, eliminate static electricity by touching the vehicle body to prevent the components
from being damaged.
(a) Remove the 2 screws and disconnect the link.
(b) Remove the 8 screws and remove the rear sunshade relay cover.