HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(a) Disconnect the L24 rear sunshade relay connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Resistance:
NG -- CHECK HARNESS AND CONNECTOR (REAR SUNSHADE RELAY - MAIN BODY ECU)
OK -- REPLACE REAR SUNSHADE RELAY See: Service and Repair/Removal
5. CHECK HARNESS AND CONNECTOR (REAR SUNSHADE RELAY - MAIN BODY ECU)
(a) Disconnect the F8 main body ECU (multiplex network body ECU) connectors.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) See: Body and Frame/Body Control Systems/Body
Control Module/Service and Repair/Removal
Component Tests and General Diagnostics
INTERIOR PANELS / TRIM: REAR SUNSHADE ASSEMBLY: INSPECTION
1. INSPECT REAR SUNSHADE ASSEMBLY
(a) Check the operation of the motor.
(1) Apply battery voltage and check the operation of the rear sunshade assembly.
OK:
Text in Illustration
(2) If the result is not as specified, replace the rear sunshade assembly.