HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Wiper Control Module: Service and Repair
Removal
WIPER / WASHER: WIPER ECU: REMOVAL
1. PRECAUTION (w/ Navigation System)
NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT See: Starting and Charging/Battery/Service and Repair/Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL See: Starting and Charging/Battery/Service and Repair/Removal
4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Removal
5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Removal
6. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY (w/o Navigation System) See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Removal
7. REMOVE REMOTE TOUCH ASSEMBLY (w/ Navigation System) See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Removal
8. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Removal
9. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio,
Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal
10. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY WITH BRACKET (w/ Navigation System) See: Accessories and Optional
Equipment/Navigation System/Service and Repair/Removal
11. REMOVE WINDSHIELD WIPER RELAY ASSEMBLY
(a) Disconnect the connector.
(b) Disengage the clamp.
(c) Remove the bolt and windshield wiper relay assembly.