HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(c) Disengage the 8 guides (B) and 2 guides (C), and pull out the cowl top ventilator louver sub-assembly as shown in the illustration.
5. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(a) Operate the wiper and stop the windshield wiper motor at the automatic stop position.
(b) Disconnect the connector.
(c) Disengage the 2 clamps.
(d) Remove the 3 bolts.
(e) Disengage the grommet and remove the windshield wiper motor and link assembly as shown in the illustration.
Text in Illustration
NOTICE:
Be careful not to damage the windshield when removing the windshield wiper motor and link assembly.
6. REMOVE FRONT WIPER CRANK SUB-ASSEMBLY
(a) Using a screwdriver, separate the No. 1 rod from the crank arm pivot of the front wiper crank sub-assembly as shown in the illustration.
Text in Illustration
HINT
Tape the screwdriver tip before use.
(b) Remove the nut and the front wiper crank sub-assembly.