HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
9. REMOVE UPPER STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column)
(a) w/ Driver Monitor Camera:
(1) Disconnect the driver monitor camera connector.
(b) Disengage the 4 clips and 2 guides to separate the instrument panel cluster finish panel from the upper steering column cover.
(c) Disengage the 2 claws and 2 pins to remove the upper steering column cover.
10. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
(a) Disconnect each connector.
(b) Disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.
NOTICE:
If the claw is pushed with excessive force, it may break.