IS 250 AWD V6-2.5L (4GR-FSE) (2006)
HINT:
^
Make sure that the claws on the clips are positioned as shown in the illustration.
^
Dimension "a" in the illustration (between the hose end and the clip end) should be less than 1.0 - 5.0 mm (0.04-0.20 in.)
^
Connect the hoses until they make contact with each stopper. (Dimension "b" should be less than 2.5 mm [0.10 in.]).
5.
Install the No. 1 inlet air cleaner with the bolt and clip.
Torque: 5 N.m (51 kgf.cm, 44 ft.lbf)
6.
Add engine coolant.
A.
Tighten all the plugs and fill the radiator with Super Long Life Coolant (SLLC).
Torque: 12.7 N.m (130 kgf.cm, 9 ft.lbf)
B.
Add engine coolant.
Specified capacity: 9.6 U.S. qts (9.1 liters, 8.0 Imp. qts)
C.
Slowly pour coolant into the radiator reservoir until it reaches the FULL line.