IS 250 AWD V6-2.5L (4GR-FSE) (2006)
/Page-1707040.png)
2. Wind the wire harness around the stud bolts of the front seat airbag assembly as shown in the illustration.
3. Position the front seat airbag assembly inside the tire.
Tire size:
Must exceed the given dimensions Width: 185 mm (7. 28 in.) Inner diameter:360 mm (14.17 in.)
CAUTION:
-
Make sure that the wire harness is tight. If there is slack in wire harness, the front seat airbag assembly may become loose due to the
shock when the airbag is deployed.
-
Always tie down the front seat airbag assembly with the airbag deployment direction facing inside the tire.
NOTE: The tire will be marked by the airbag deployment, so use an extra tire.
d. Install the SST.
1. Connect the SST connector to the front seat airbag assembly connector.
SST 09082-00750